| |
> Cane sugar mills |
| |
The CANEFLEX reduction
gear has been specially designed for the milling of cane
sugar. A range of 5 sizes covers all the capacities of
the washers and mills. |
| |
|
| |
The standard CANEFLEX
reduction gear is designed for input speeds of between
600 rpm and 1,800 rpm and output speeds of between 3 rpm
and 7 rpm. |
| |
|
| |
The output shaft and bearing
are designed to accept the loads induced by the tail-bar.
The CANEFLEX reduction gear is easy to fit,
the result of long experience in the field. |
| |
|
| |
> Diffusion processes |
| |
CMD proposes a BOGIFLEX
drive solution, a self-aligned floating reduction gear,
for vertical diffusion processes.
The light, modular drive units allow high torque capacities. |
| |
|
| |
The torque delivered by a BOGIFLEX
reduction gear of the BPF type on the ring gear is around
16 kNm to 120 kNm. The input speed variation is from 300
rpm to 1500 rpm. |
| |
|
| |
For the horizontal diffusion
tube drive, CMD provides a solution based on BOGIFLEX
planetary reduction gears (BFT type). Each reduction gear
can accept torques of between 6 kNm and 50 kNm. The output
rotational speed of the reduction gear is very slow :
between 0.1 rpm and 0.2 rpm. |
